/ip firewall filter add chain=forward dst-address=”remoterange” src-address=”localrange” place-before=0 /ip firewall filter add chain=forward dst-address=”localrange” src-address=”remoterange” place-before=0
Mikrotik
18 posts
How to set the NTP client on a Mikrotik router using the Terminal /system ntp client set enabled=yes primary-ntp=###.###.###.### secondary-ntp=###.###.###.### Change the ### for IP address’s Once done use the below to check if the settings has been applied /system ntp client print Below are two IP addresess for NTP […]
The below example shows a simple port forward that is forwarding TCP, Port 32400 (Plex) to the internal address 192.168.88.250 (Plex Media Server) This string is entered into the console. /ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=32400 in-interface=ether1-gateway protocol=tcp to-addresses=192.168.88.250 to-ports=32400